♠ Posted by ggg at 04:09
Walton Primo N1 Software, Flashtools and Drivers
1. Install driver.
2. Open Flash Tool
3. Open Download Agent and select MTK_AllinOne_DA
4. Open scatter_loading and select scatter file
Software-> WBW5883WA_0301_T5393 -> MT6589_Android_scatter_emmc.txt
5. Click Firmware->Upgrade and connect USB cable with mobile without battery
6. Insert Battery then start downloading..
7. When it shows Firmware Upgrade , then installation is completed.
After Firmware Upgrade give Reset to Factory Setting
FILE
DOWNLOAD
1. Install driver.
2. Open Flash Tool
3. Open Download Agent and select MTK_AllinOne_DA
4. Open scatter_loading and select scatter file
Software-> WBW5883WA_0301_T5393 -> MT6589_Android_scatter_emmc.txt
5. Click Firmware->Upgrade and connect USB cable with mobile without battery
6. Insert Battery then start downloading..
7. When it shows Firmware Upgrade , then installation is completed.
After Firmware Upgrade give Reset to Factory Setting
FILE
DOWNLOAD
Walton Primo X1 Software, Flashtools and Drivers
1. Install driver.
2. Open Flash Tool
3. Open Download Agent and select MTK_AllinOne_DA
4. Open scatter_loading and select scatter file
Software-> WBWS305WA_0201_T5056 -> MT6589_Android_scatter_emmc.txt
5. Click Firmware->Upgrade and connect USB cable with mobile Off
6. Then start downloading..
7. When it shows Firmware Upgrade , then installation is completed.
After Firmware Upgrade give Reset to Factory Setting
FILE & TOOLSDOWNLOAD
Walton Primo R1 Software, Flashtools and Drivers
DOWNLOAD
DOWNLOAD
WALTON Primo G2 Software update (AP+BP) Guide
Driver installation
1) Install AP part driver
Power off handset, press “Power key + Voice Up key” until the screen shows green, plug in usb cable, PC will remind you of installing new hardware. Unzip “ Driver”, select adb driver file, install AP driver.
Path: Right click on My computer>Manage>Device manager>Android(Yellow notification)>Update driver software>browse path> select adb folder >Continue anyway>finish
When you install AP driver successfully, you will find “Fastboot interface” in device manager. As below
2) Install BP part driver
(i) Power off handset, press “Power key + Voice Down key” until the screen shows QPST mode, plug in 5Pin USB cable, Unzip “Driver”, select HK11-VB717-27_1.0.56 driver file, install BP driver.
Path: Right click on My computer>Manage>Device manager>Tiyanyu HS-USB Driver (Yellow notification)>Update driver software>browse path> HK11-VB717-27_1.0.56\Win32\x86\free >Continue anyway>finish.
(ii) When your BP driver is installed successfully, you will find Qualcomm HS-USB ports in device manager. As below:
Software Upgrading:
1.Download BP
Open Primo Download V1.2.3 tool, set your handset into BP mode (Power key+ Voice down key) and connect your phone with USB cable.
1. Click set path>Browse folder>Select 592522_8550_WCDMA_V000001
2. Click Download All
2.AP Download:
Open Primo Flasher V1.0 tool, set your handset into AP mode (Power key+ Voice up key) and connect your phone with USB cable.
. 1. Click Set path>Browse folder>Select 592522_8550_V001006
2. Click Ok for Start download.
Note: If your antivirus detects Primo Flash Tool as virus, disable your antivirus till software is finish.
GO
Software & tools link
1 . Double click Setup.exe to install the driver.
Uploaded with ImageShack.us
2 . Double click ResearchDownload.exe and open the flashing tool.
[/URL]
3 . Click the first button, select the correct .pac file and confirm.
Uploaded with ImageShack.us
4 . Click the third button to get ready to start.
Uploaded with ImageShack.us
5 . Connect the handset to PC with USB data cable, Long press volume down key and insert the battery. Now it starts to install the software.
6 . When it shows Passed in green, the installation is completed.
Uploaded with ImageShack.us
Driver installation
1) Install AP part driver
Power off handset, press “Power key + Voice Up key” until the screen shows green, plug in usb cable, PC will remind you of installing new hardware. Unzip “ Driver”, select adb driver file, install AP driver.
Path: Right click on My computer>Manage>Device manager>Android(Yellow notification)>Update driver software>browse path> select adb folder >Continue anyway>finish
When you install AP driver successfully, you will find “Fastboot interface” in device manager. As below
2) Install BP part driver
(i) Power off handset, press “Power key + Voice Down key” until the screen shows QPST mode, plug in 5Pin USB cable, Unzip “Driver”, select HK11-VB717-27_1.0.56 driver file, install BP driver.
Path: Right click on My computer>Manage>Device manager>Tiyanyu HS-USB Driver (Yellow notification)>Update driver software>browse path> HK11-VB717-27_1.0.56\Win32\x86\free >Continue anyway>finish.
(ii) When your BP driver is installed successfully, you will find Qualcomm HS-USB ports in device manager. As below:
Software Upgrading:
1.Download BP
Open Primo Download V1.2.3 tool, set your handset into BP mode (Power key+ Voice down key) and connect your phone with USB cable.
1. Click set path>Browse folder>Select 592522_8550_WCDMA_V000001
2. Click Download All
2.AP Download:
Open Primo Flasher V1.0 tool, set your handset into AP mode (Power key+ Voice up key) and connect your phone with USB cable.
. 1. Click Set path>Browse folder>Select 592522_8550_V001006
2. Click Ok for Start download.
Note: If your antivirus detects Primo Flash Tool as virus, disable your antivirus till software is finish.
GO
Walton Primo-C1 Flashing Software & tools
Software & tools link
Software Flashing Instructions for Primo-C1
1 . Double click Setup.exe to install the driver.
Uploaded with ImageShack.us
2 . Double click ResearchDownload.exe and open the flashing tool.
[/URL]3 . Click the first button, select the correct .pac file and confirm.
Uploaded with ImageShack.us
4 . Click the third button to get ready to start.
Uploaded with ImageShack.us
5 . Connect the handset to PC with USB data cable, Long press volume down key and insert the battery. Now it starts to install the software.
6 . When it shows Passed in green, the installation is completed.
Uploaded with ImageShack.us
0 comments:
Post a Comment